Products
CPS4283 type tri-dividing frequency surround speaker system

· Three-way frequency surround speaker system
· It can connect more units by parallel output
· Level scattering Angle is 100 degrees, vertical scattering Angle is100 degrees
· It has a quick installation trestle for fast, simple and safe installation
· High power load bearing strength has optimized for the digital sound reproducing
· It has an adjustable hanger-bearing structure for simple installation, and a wide compass and smooth acoustic covering

CPS4283 is a tri-dividing frequency surround speaker system with high sensitivity, wide reproduction frequency, and uniform acoustic covering. It is perfect for medium and small sized cinemas. It has an adjustable hanger-bearing structure for simple installation and has a wide compass and smooth acoustic covering, which can faithfully reproduce the atmosphere of the environmental sound in digital-sound movies. It will be the best choice for digital movie surround reproducing.

technical parameters
CPS4283
Frequency response
50-20KHz(-6dB)
 Coverage angles
100 º×100 º(H×V)
 
Woffer
Medium frequency speaker
High frequency drive
Unit model
PW809
HW504
PD2203
transducer
One Φ 220 mm high efficiency low frequency speakers, Φ 36.5 mm KAPTON skeleton voice coil,, Φ 126 mm strontium qualitative magnets.
One Φ145 mm high efficiency low frequency speakers, Φ 19 mm KAPTON skeleton voice coil,, Φ70 mm strontium qualitative magnets.
Φ 25 mm titanium coating compression drive structure, KAPTON skeleton rectangular section copper coated aluminium wire voice coil,, Φ 70 mm strontium qualitative magnets.
Nominal impedance
sensitivity 1w/1m
92dB
Rated Input Power
150W
Maximum input power
300W
Maximum SPL
116.8 dB
Connection
2 metal connecting terminals, the biggest standard wire is 6 mm2.
dimensions
500mm×480mm × 270mm (H×W×D)
Net weight
14kg

PS:
1. All listed frequency ranges are measured in free sound field. (half space, 2 PI)
2. The pressure level can be calculated in 1 meter, the speaker is rated continuous power output, the signal source is pink noise, within the designated frequency range.
3. Maximum output power test meets IEC268-5 recommend standard, 50 Hz-20 KHz bandwidth, 6 dB signal peak factor.